This driver is required for all HI-4413USB USB To Fiber-Optic Interface’s and all HI-6113 Laser Data Interface's manufactured after 3/31/2008. This file is not needed if using an internet connected computer running Windows 10. After you upgrade the computer from Windows 7 to Windows 8.1 or Windows 8, devices that connect to the computer by using a FireWire port do not work. Cause This issue occurs because the legacy 1394 bus drivers (1394bus.sys and Ochi1394.sys) are removed in Windows 8.1 or Windows 8.

Errors: No Drives Were Found. Click Load Driver to Provide a Mass Storage Driver for Installation

1. All other trademarks, logos and brand names shown on this website other than stated are the sole property of their respective companies and are not owned by oemdrivers.com. Information on the oemdrivers.com may not be duplicated without permission. Oemdrivers.com is not responsible for any damages or losses that may arise from incorrect driver installation.
2. The Device Install Kit download site does not provide access to all Emerson Process Management device files. Device files distributed on DeltaV and AMS Device Manager release media are not duplicated for download from this site.
3. Media's Choice: Recommended by the Wall Street Journal, which remarked that 'PowerPort 4 was a godsend.' Advanced Charging Technology: PowerIQ and VoltageBoost combine to provide the fastest possible charge up to 8 amps or 2.4 amps per port.(Does not support Qualcomm Quick Charge). Certified Safe: Anker's MultiProtect.

During the process of installing Windows OS on a specified HDD or SSD, you may surprisingly find that the hard disk is not detected during the Windows installation, with either of the following error messages coming along.

'We couldn't find any drives. To get a storage driver, click Load driver.' 'No drives were found. Click Load Driver to provide a mass storage driver for installation.'

However, clicking 'Load Driver' doesn't solve the problem at all. What's the next move then? Have you found viable solutions to troubleshoot hard disk not detected in Windows 10 or Windows 7 installation even it's normally connected to the computer?

How to Fix Hard Disk Not Detected in Windows 10 Installation

Even though Windows 10 or Windows 7 installations include almost all disk drivers, the 'No drives were found. Click load driver to provide a mass storage driver for installation' issue occurs from time to time and you find no way to out. When you encounter Windows 10 install not detecting hard drive or Windows 7 couldn’t find any drivers to get storage driver problems, try the practical six ways below.

Method 1. Use a Different SATA Port

If you are using a desktop computer, try using a different SATA port and see if that helps at all. Sometimes they come with two different controllers.

Method 2. Load RAID Driver for RAID Disk

Windows 10 install not detecting hard drive mostly occurs on RAID disk. In this case, you need to load RAID drivers manually to fix the issue.

Step 1. On the Windows Setup windows, you will see Where do you want to install Windows? And there is no hard drive detected. Click 'Load Drivers' at the bottom left of the screen, then click 'Browse' to choose the device driver.

Step 2. Go to your computer or storage device to find and load an available RAID driver.

Step 3. After the device diver has been loaded, Windows 10 installing will successfully detect the hard disk. Then, follow the onscreen instructions to install Windows.

Method 3. Check the Hard Drive in BIOS

Otherwise, take some time to check if hard drive shows up in BIOS, especially you're installing an operating system from a bootable USB or CD/DVD disc.

By holding and pressing F2, you'll enter BIOS settings. See if the hard drive showing up there. Click solution to repair hard drive not showing in BIOS.

If not, check your BIOS settings for the following parameters:
* SATA configuration -> Enhanced
* Configure SATA -> AHCI

Method 4. Check the Status of Your Hard Drive

Step 1. Press Windows + R and the window will pop up.

Step 2. Input devmgmt.msc and press Enter.

Step 3. Choose Disk Drives and right-click the hard drive.

Step 4. Click Properties and check the status of your hard drive. If it is Ok, showing 'This device is working properly'.

Method 5. Boot from Windows 10 Install Media

Microsoft also provides a method about boot from the Window 10 Install Media. You can take these steps to fix the issues 'drive not showing up when Windows 10 install'.

Step 1. Choose Install Now > Accept License Agreement > Choose the installation type and click 'Custom Advanced'.

Step 2. Press Shift + F10.

Input each command and press Enter: DISKPART > list volume > select disk* > clean > convert mbr > create partition primary > active > format quick fs=ntfs >exit

Then you can install Windows again.

Method 6. Ask Help from the Manufacturer

Since the manner of installing or reinstalling Windows OS happens so frequently that most personal PC or desktop manufacturers have built-in checking tools for quick troubleshooting and repair. For example, Dell Online Diagnostic Tool, Lenovo Diagnostic Software for Hard Drive Quick Test, etc. So if you're their customers, feel no hesitate to ask help from the manufacturer and learn how to use tools to fix hard drive not detected issues alright.

Bonus Tip: Free Partition Master to Enhance System Performance

You can enjoy the exciting features of the latest system after successful Windows 10 installing. Furthermore, to enhance system performance and let software and hardware cooperate to achieve an optimal operating state, it’s necessary for you to have free partition management software, which enables you to organize and optimize your hard drive to extend your computer's life and capableness.

EaseUS Partition Master Free is a versatile partition management program that provides one-stop partition and disk management solutions, for instances:

• Resize/move partitions by sliding the partition left and right or enter the exact partition size you want, such as increase C drive to speed up your computer (move space from D drive to C drive supported by paid version)
• Create, format, delete, copy, and merge partitions
• Clone an entire disk to another even the destination partition is smaller than the source
• Convert file system from FAT32 to NTFS, convert MBR to GPT, convert dynamic disk to basic disk and vice versa, and so on
• Completely wipe out all the data on hard disk permanently

Now, download this ultimate Windows 10/8/7 disk management tool and follow the simple steps below to resize and move your partitions.

Step 1. Launch EaseUS Partition Master on your PC.

Step 2. Free up space to extend partition.

If the hard drive has enough unallocated space to extend the target partition, jump to Step 3, and continue. If not, free up space first:

• Right-click on a partition next to the target partition and select 'Resize/Move'.
• Drag the partition ends to free up space, leaving enough unallocated space behind the target partition, click 'OK'.

Step 3. Extend partition.

• Right-click on the target partition and select 'Resize/Move'.

• Drag the target partition handle into the unallocated space to extend partition.

Step 4. Keep all changes.

• Click the 'Execute Operation' button and click 'Apply' to keep all changes.

Windows 10 Install Not Detecting Hard Drive FAQs

1. How do I fix no device drivers found?

Fixes for No Device Drivers Were Found:

Solution 1. Switch to a USB 2.0 Port

Solution 2. Set the partition where you want to install Windows to as Activeewe

Solution 3. Create a New Disc

Solution 4. Enable the xHCI hand-off Option in BIOS

Solution 5. Change everything to legacy and set the boot device to your DVD or USB

2. Where do you want to install Windows 10 no drives were found?

To fix 'No drives were found. Click load driver to provide a mass storage driver for installation', do it in the following way:

Step 1. Click 'Load Drivers' at the bottom left of the screen, then click 'Browse' to choose the device driver.

Step 2. Choose and load an available RAID driver.

Step 3. After Windows 10 installing successfully detects the hard disk, follow the onscreen instructions to install Windows.

3. Where do you want to install Windows 7 no drives were found?

Fix: No Hard Drives Found in Windows 7 Installer:

Solution 1. Format the hard drive using diskpart in command prompt.

Solution 2. Load the hard drive storage controller drivers from a USB into the Windows setup.

Emsense Port Devices Drivers

Solution 3. Change the boot controller mode in BIOS.

Solution 4. Reset BIOS.

Solution 5. Use a different SATA port.

4. How do I install drivers for my hard drive?

The basic steps to install drivers for a hard drive are:

Step 1. Configure the drive as a master or slave device (PATA only).

Step 2. Mount the drive in the chassis.

Step 3. Connect the data cable to the drive and to the PATA or SATA interface.

Step 4. Connect a power cable to the drive.

Step 5. Restart the system and run the BIOS Setup.

Step 6. If you are also installing a PATA or SATA interface card or RAID adapter, configure that card per the maker's instructions and attach the cables to it.

This topic is intended for OEMs who want to build a Windows 10 system with USB Type-C connector and want to leverage OS features that allow for faster charging, power delivery, dual role, alternate modes, and error notifications through Billboard devices.

A traditional USB connection uses a cable with a USB A and USB B connector on each end. The USB A connector always plugs in to the host side and the USB B connector connects the function side, which is a device (phone) or peripheral (mouse, keyboard). By using those connectors, you can only connect a host to a function; never a host to another host or a function to another function. The host is the power source provider and the function consumes power from the host.

Emsense Port Devices Driver Updater

The traditional configuration limits some scenarios. For example, if a mobile device wants to connect to a peripheral, the device must act as the host and deliver power to the connected device.

The USB Type-C connector, introduced by the USB-IF, defined in the USB 3.1 specification, addresses those limitations. Windows 10 introduces native support for those features.

Feature summary

• Allows for faster charging up to 100W with Power Delivery over USB Type-C.
• Single connector for both USB Hosts and USB Devices.
• Can switch USB roles to support a USB host or device.
• Can switch power roles between sourcing and sinking power.
• Supports other protocols like DisplayPort and Thunderbolt over USB Type-C.
• Introduces USB Billboard device class to provide error notifications for Alternate Modes.

Official specifications

Hardware design

USB Type-C connector is reversible and symmetric.

The main component are: the USB Type-C connector and its port or PD controller that manages the CC pin logic for the connector. Such systems typically have a dual-role controller that can swap the USB role from host to function. It has Display-Out module that allows video signal to be transmitted over USB. Optionally it can support BC1.2 charger detection.

Consider recommendations for the design and development of USB components, including minimum hardware requirements, Windows Hardware Compatibility Program requirements, and other recommendations that build on those requirements.Hardware component guidelines USB

Choose a driver model

Use this flow chart to determine a solution for your USB Type-C system.

Emsense Port Devices Driver Device

Emsense Port Devices Driver License Test

Bring up drivers

• USB Function driver bring-up is only required if you support USB Function mode. If you previously implemented a USB Function driver for a USB micro-B connector, describe the appropriate connectors as USB Type-C in the ACPI tables for the USB Function driver to continue working.

  For more information, see instructions about writing a USB Function driver.

• USB Role-Switch driver bring-up is only required for devices that have a Dual Role controller that assumes both Host and Function roles. To bring-up the USB Role-Switch driver, you need to modify the ACPI tables to enable the Microsoft in-box USB role-switch driver.

  For more information, see the guidance for bringing up the USB Role Switch Driver.

• A USB Connector Manager Driver is required for Windows to manage the USB Type-C ports on a system. The bring-up tasks for a USB Connector Manager driver depend on the driver that you choose for the USB Type-C ports: The Microsoft in-box UCSI (UcmUcsiCx.sys and UcmUcsiAcpiClient.sys) driver, a UcmCx client driver, or a UcmTcpciCx client driver. For more information, see the links in the preceding section that describe how to choose the right solution for your USB Type-C system.

Emsense Port Devices Driver

Test

Perform various functional and stress tests on systems and devices that expose a USB Type-C connector.

Test USB Type-C systems with USB Type-C ConnEx - Run USB tests included in the Windows Hardware Lab Kit (HLK) for Windows 10.

Run USB function HLK tests with a C-to-A cable (search for Windows USB Device in the HLK

Certification/ComplianceAttend Power Delivery and USB Type-C compliance workshops hosted by the standards bodies.

See also